Installation Guide
Configuration
4 . If more devices are installed,
select a device .
7 . Select actuator type and press
"OK/Return" .
4: Configure a room
1 . Select "Heating regulation" .
10
Danfoss Link™ HC
5 . Select output . Only available
outputs are selectable .
2 . Select type of regulation .
VIFZL15X
© Danfoss
6 . Select heating emitter and press
"Actuator Settings" .
• Forecasting method:
by activation of the forecast
method, the system will automati-
cally predict the heating start-up
time necessary to reach desired
room temperature at desired time .
• Regulation type:
only in connection with electrical
heating systems .
08/2010