Attaching/Removing Other Nozzles - Cleanmaxx KB-2012A-1 Gebrauchsanleitung

Attaching/removing other nozzles

1. If you would like to use the main unit as a hand-held steam cleaner with one of the other
enclosed nozzles, you must take the main unit out of the bracket.
3. You can mount various nozzles on the extension hose with the nozzle adapter:
4. Different methods are used to attach the microfi bre cloths to the nozzles:
2. In order to use the other enclosed nozzles (except for the fur-
niture cleaning adapter (17)), you fi rst have to mount the ex-
tension hose (26) on the main unit: Mount it at the front of the
steam nozzle on the main unit. The extension hose must audibly
lock into place.
– In order to remove the extension hose, press the release but-
ton for the extension hose (9) and pull it off at the same time.
– Mount the desired nozzle on the nozzle adapter attached to the
extension hose. The nozzle must audibly lock into place.
– To remove the nozzle, press the release button on the extension
hose while pulling the nozzle off at the same time.
– Place the microfi bre cloth for the window cleaning adapter on the
hooks of the window cleaning adapter and use the draw string to
pull it tight. Make sure that it is positioned in the notches on the
side of the window cleaning adapter. After use, release the string
by pressing the button and pulling the draw string down.
– Slip the microfi bre cloth for the dust cleaning adapter over the
dust cleaning adapter and use the draw string to pull it tight. After
use, release the string by pressing the button and pulling the draw
string down.
– Pull the microfi bre cloth for the textile cleaning adapter over the
textile cleaning adapter. After use, simply pull it off starting on one
side.
5. You do not need the extension hose in order to use the fur-
niture cleaning adapter (17). The furniture cleaning adapter is
attached directly to the main unit. Place the tip of the main unit
on the furniture cleaning adapter at an angle. Push it forward
and down at the same time. The main unit must audibly lock
into place.
– The microfi bre cloth is attached to the furniture cleaning adap-
ter via Velcro strips. Place the furniture cleaning adapter on the
cloth and push to tighten it. After use, simply pull it off of the
furniture cleaning adapter.
– To remove the furniture cleaning adapter, push the two catches
on the sides of the furniture cleaning adapter together.
25