Herunterladen Inhalt Inhalt Diese Seite drucken

Specifications; Stihl Msa 160 T Chainsaw; Chain Sprockets And Chain Speeds; Minimum Groove Depth Of Guide Bars - Stihl MSA 160 T Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für MSA 160 T:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3

19 Specifications

19 Specifications

19.1 STIHL MSA 160 T Chainsaw

– Approved battery: STIHL AP
– Weight without battery, guide bar and saw chain 1.9 kg
– Max. oil tank capacity: 105 cc (0.105 l)

19.2 Chain Sprockets and Chain Speeds

The following chain sprockets may be used and produce the
maximum chain speed quoted below:
– 7-tooth for 1/4" P: 11.5 m/s

19.3 Minimum groove depth of guide bars

The mininum groove depth depends on the pitch of the guide
bar.
– 1/4" P 4 mm

19.4 Chain saw filing angle

– 71 PM3 (Type 3670) 30°

19.5 STIHL AP battery

– Battery Technology: Lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: see rating label
– Permissible temperature range for operation and storage:
-10°C to +50°C

19.6 Noise and Vibration Data

STIHL recommends that you wear hearing protection.
0458-706-9921-A
– Sound pressure level L
pA
EN 60745-2-13: 81 dB(A) K-value for noise pressure level
is 2.5 dB(A).
– Sound power level L
measured according to EN 60745-
w
2-13: 93 dB(A) K-value for sound power level is 2.5 dB(A).
– Vibration level a
measured according to EN 60745-2-13
hv
– Control handle: < 2.5 m/s². K-value for vibration level is
2.0 m/s².
– Front handle: < 2.5 m/s². K-value for vibration level is
2.0 m/s².
The vibration values quoted above have been measured
according to a standardized test procedure and may be used
to compare electric power tools. Depending on the type of
usage, the vibrations that actually occur may differ from the
values quoted. The vibration values quoted may be used for
an initial assessment of the user's exposure to vibrations.
The actual exposure to vibrations has to be estimated. This
process may also take into account times during which the
electric power tool is switched off and times during which it
is switched on but running off load.

19.7 REACH

REACH is an EC regulation and stands for the Registration,
Evaluation, Authorisation and Restriction of Chemical
substances.
For information on compliance with the REACH regulation
see www.stihl.com/reach.
English
measured according to
63

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis