Counting - Sartorius M-prove Betriebsanleitung

Counting

Purpose
With the Counting program you can determine the number of parts or items.
Example: Determine the number of uncounted parts; weigh in the selectable reference
sample quantity (in this example: 20)
Step
1. Select application program
2. Select Counting
3. Confirm setting
Symbol " " on the display:
application is active
4. Place empty container on the balance
5. Zero the balance
6. Place reference sample quantity (20)
on the balance
7. Select reference sample quantity:
in increments of 1 (1, 2, 3, ..., 99) or
in increments of 10 (10, 20, 30, ...,100)
8. Confirm selected reference
sample quantity
9. Place uncounted parts on balance
10. Toggle display between mean
piece weight, total weight, and quantity
11. Unload the balance
12. Counting application: value
clear the reference (Enter) > 2 sec
13. Reactivate Counting (if no other
application program has been selected)
14. Repeat procedure starting from Step 5.
Key (or instruction)
(Zero) > 2 sec
(F) repeatedly
(Enter)
(Zero)
(F) repeatedly (briefly) or
(F) > 2 sec.
(Enter)
(F) repeatedly
(F)
Display
11 11