Battery Compartment; Rear - Tascam DR-10SG Bedienungsanleitung

MENU button again to return to the Home
Screen.
i When a setting item is shown, press the
MENU button to return to the Menu Screen.
4 8 button
Press this button during recording to stop
recording.
Press this button during playback to pause
playback at the current position. Press this button
when paused to return to the beginning of the
file.
5 RECORD button
Press this button to start recording.
6 7'9 [ENTER] button
i When the Home Screen is open, press the
7'9 [ENTER] button to start file playback.
i Press the 7'9 [ENTER] button during
playback to pause playback.
i When the Menu Screen is open or a setting
item is shown, press the 7'9 [ENTER]
button to confirm the selected item. Use this
also to respond to a confirmation message.
7 Battery compartment cover

8 Battery compartment

Install one AAA battery in this compartment to
power the unit.
8
TASCAM DR-10SG

Rear

9 PHONES [−]/[+] buttons
Use the + and − buttons to adjust the volume
output from the headphones jack.
During adjustment, a volume indicator will
appear on the display.
Large
Small
CAUTION
Before connecting headphones, lower the
volume to the minimum level. Failure to do so
might cause sudden loud noises, which could
harm your hearing or result in other trouble.
Do not apply excessive force to the jack when
connecting and using headphones. Be careful,
because the application of unintended force,
particularly when using a mini jack, could
damage the equipment.
0 REC indicator
This indicator will light during recording.
q .// buttons
i Use the .// buttons during recording
to change the mic gain setting.
i During playback or when stopped in the
middle of a file, press the . button to
return to the beginning of the file.
i Press when located at the beginning of a file
to skip to the beginning of the previous file.
Press and hold this button during playback to
search backward.
i During playback or when stopped in the
middle of a file, press the / button to skip
to the beginning of the next file. Press and
hold this button during playback to search
forward.
i When the Menu Screen is open, use the
.// buttons to select menu items.
i When a setting item is shown, press the .
and / buttons to move the cursor left and
right.
i When inputting a file name, use this to select
characters.
CAUTION
When is set to
04: AUTO LEVEL
gain setting cannot be changed using the
.// buttons during recording.
Pressing these buttons during recording will
cause a pop-up message
NO-AUTOLVL ON !
to appear.
w Recording level indicators
Use these as guides when adjusting the
recording level.
, the mic
ON