Recording Durations When Using Microsd Cards; Connecting With A Computer; Starting And Stopping Recording - Tascam DR-10SG Bedienungsanleitung

• Do not leave them in extremely humid places,
and do not let them become wet.
• Do not put things on top of them or twist them.
• Do not hit them.
• Do not remove or insert a card during data
transmission or other access.
Recording durations when using
microSD cards
The table below shows maximum recording times
on microSD/microSDHC cards of different capacities.
24-bit/48kHz WAV recording
microSD/
setting
microSDHC
card capacity
DUAL REC OFF
(hours:minutes)
1 GB 2:04
2 GB
4:08
4 GB
8:16
8 GB 16:32
• The recording times shown above are estimates.
They might differ depending on the microSD/
microSDHC card in use.
• The recording times shown above are not
continuous recording times, but rather they
are the total possible recording times for the
microSD/microSDHC card.

Connecting with a computer

Connect the unit to a computer using a USB cable as
shown in the illustration.
12
TASCAM DR-10SG
DUAL REC ON/
FILE TYPE POLY
1:02
2:04
Whether the power is on or off, when connected,
4:08
the
POWER/STORAGE
8:16
selection of bus power supply or USB connection
with the computer.
Use the . and / buttons to select (highlight)
the
POWER/STORAGE
press the 7'9 [ENTER] button to confirm it.
• If
POWER
the USB port and the Home Screen will appear.
• If
STORAGE
appear on the display after the unit connects to
the computer without any problems.
If the card has been formatted by the unit, it
will be shown on the computer as a USB device
named "DR-10SG". Otherwise, the volume label
set when the card was formatted will be shown.
Computer
microB USB cable
screen appears to allow
option on the display, and
is selected, power will be supplied from
is selected, will
USB connected
Double-click the drive shown to open it and
show a list of the recording files so you can
retrieve the desired files.
Starting and stopping
recording
8 Starting recording
With the unit is on, press the RECORD button to
start recording.
8 Stopping recording
Press the 8 button to stop recording.
The following information appears on the display
when stopped, when recording starts and during
recording.
Stopped
When recording
starts
Recording
1 Recorder operation status
2 File name
3 Remaining battery charge
4 Elapsed recording time