Menu Structure - Tascam DR-10SG Bedienungsanleitung

Menu structure

Press the MENU button to open the Menu Screen. This list provides an overview of the various menu items.
CAUTION
During recording, pressing the MENU button will only open the following menu items.
, ,
01 : MIC GAIN 02: EQ 03: LOW CUT
Menu item Summary
Mic gain setting
01 : MIC GAIN
EQ setting
02: EQ
Low cut filter
03: LOW CUT
Automatic level
04: AUTO LEVEL
adjustment
Limiter
05: LIMITER
Sampling
frequency
06: FS SAMPLE
setting
Quantization bit
07: BIT LENGTH
depth setting
14
TASCAM DR-10SG
,
04: AUTO LEVEL
Settings (default
Explanation
value underlined)
Use to set the mic input sensitivity.
– (in incre-
00 50
CAUTION
ments of ; default:
1
) If the menu screen
25
OFF if it is
Set the equalizer.
,
NATURAL
NATURAL
,
STANDARD
STANDARD
,
INTERVIEW
INTERVIEW
FIELD
: Setting ideal field recordings
FIELD
Turns the mic input low-cut filter on or off.
,
OFF ON
The cutoff frequency is 120 Hz.
When the input sound level is too low or too high, the recording volume will be increased or decreased
,
OFF ON
automatically to an appropriate level.
This function prevents distortion when signals that are too loud are input suddenly. Turns this function on
or off.
Distortion of sounds may occur when signals that are very loud are input even if the LIMITER function is
,
OFF ON
activated.
In such a case, use the Menu Screen
distance from the sound source.
, Set the sampling frequency.
44. 1kHz 48kHz
, Set the quantization bit depth.
16bi t 24bi t
setting is changed, the
01 : MIC GAIN
. When this happens, an
ON AUTO LVL Cance l
: Close to original sound
: Regular setting for a shotgun mic
: Setting ideal for interviews
01 : MIC GAIN
item setting will be set to
04: AUTO LEVEL
pop-up message will appear.
item to lower the mic input sensitivity, or increase the