Switching Off - Silvercrest SIKP 2000 B2 Bedienungsanleitung

Switching off
■ The appliance switches off , ...
–
–
NOTICE
► In standby mode, that is, after switching off or before switching on, an "- L-"
or an "- H -" appears in the display 8. This heat indicator means:
–
or
–
■ For safety reasons, the cookware recognition feature switches the appliance
off automatically when you ...
–
–
NOTICE
► As soon as you take the cookware from the cooking area, "Err" fl ashes in
the display.
■ The cooking area
use, should you not have entered in any new settings in the meantime.
SIKP 2000 B2
if, within 30 seconds of switching on, you do not select any further function,
if you activate the button On/Off
actual use.
"- L -" = "Low" - Temperature the cooking area
"- H -" = "High" - Temperature the cooking area
remove the cookware from the cooking area
seconds, or do not place one there..
Although the energy fi eld is immediately switched off with short-term
cookware removals - the selected function remains, however, active.
Around every 3 seconds a signal tone issues a reminder that, in roughly
15 seconds, the appliance will switch itself off automatically. If you replace
the cookware back onto the cooking area 1 within 15 seconds, the
selected function will continue on the same settings.
1 also switches itself off after 120 minutes of continuous
5 once again, also when it is in
1 <60°C
1 >60°C
1 for longer than 15
GB
9