Setup; Utilisation; Placing The Cookware; Switching On - Silvercrest SIKP 2000 B2 Bedienungsanleitung

Setup

GB
IE

Utilisation

Placing the cookware

Switching on

8
So as not to overheat, the appliance requires unrestricted ventilation. Therefore,
position the appliance such that ...
– there is an all-round free space of minimum 10 cm, e.g. to the nearest
wall,
– a free space directly above of minimum 60 cm, e.g. to a suspended wall
cabinet.
For cooling, the appliance draws in air through the openings on the underside.
■ Therefore, place it only on smooth surfaces, not on textiles or fl uff y surfaces,
such as tablecloths.
■ Do not place it adjacent to curtains, drapes or other textiles which, due to
the airfl ow, could press themselves against the appliance.
When you have unpacked and positioned the appliance as described above, it
is now ready for use.
■ Place the cookware in the middle of the cooking area
– not project beyond the edge of the cooking area
– not weigh more than 10 kg (together with the content).
■ When cookware with content is standing on the hob
2 into a mains power socket. A signal tone sounds and
– Insert the plug
„- L -" appears on the display 8. The appliance is now ready for use.
– Press the button On/Off
the control lamp Cooking w blinks, the symbol
display 8 and „L5" appears in the display 8. A signal tone sounds.
The appliance is now ready for use.
5. The control lamp POWER 4 lights up,
1. This may ...
1...
1:
fl ashes below the
SIKP 2000 B2