Checking The Battery Charge Level; Operation; Dust Extraction; Dust Collection Box - Parkside PAHS 12 B2 Originalbetriebsanleitung

1 .) To remove the battery pack
lease button and pull the battery pack
out of the appliance .
2 .) Insert the battery pack
charger .
3 .) Insert the power plug into the socket . The control
LED lights up red .
4 .) The green charge status indicator LED
you when the charging process is complete and
the battery pack
5 .) Push the battery pack
ance .

Checking the battery charge level

If the appliance is switched on, the remaining
charge will be shown on the battery LED
follows:
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery

Operation

NOTE
► Always switch the sander on before applying
it to the workpiece .
Switching the appliance on:
♦ Press the ON/OFF switch
Switching the device off:
♦ Press the ON/OFF switch
PAHS 12 B2
, press the re-
into the battery
shows
is ready for operation .
back into the appli-
as
.
.

Dust extraction

WARNING! RISK OF FIRE!
► When working with power tools that have a
dust collection box or can be connected to
a vacuum cleaner via the vacuum cleaner
adapter, there is a risk of fire! In unfavourable
conditions, e .g . when sparks are flying while
sanding metal or metal residues in wood,
wood dust in the dust sack (or in the vacuum
cleaner dust bag) can spontaneously ignite .
This is a particular risk if the wood dust is
mixed with paint residues or other chemicals
and the workpiece has become hot after
being worked for a long time . Therefore, do
not allow the workpiece to overheat and
always empty the dust box or the dust bag
of the vacuum cleaner before taking a break
from work .
Wear a dust mask!
WARNING!
► Always disconnect the battery pack
fore carrying out any work on the appliance .

Dust collection box

Connection:
♦ Push the dust collection box
sander as far as the stop
Removal:
♦ Press the release button
box and pull it off towards the rear .
NOTE
► To achieve optimum dust extraction, the dust
collection box
regularly .
♦ To do this, remove the dust collection box
from the appliance as described above . Open
the dust box by pulling on the tab
removing the lid . Clean both parts thoroughly
by tapping them out .
be-
onto the multi-
.
of the dust collection
should be emptied
and then
GB │ IE │ NI │ 7 ■