Use And Handling Of The Cordless Electrical Power Tool; Service; Appliance-Specific Safety Instructions For Manual Sanders - Parkside PAHS 12 B2 Originalbetriebsanleitung

5 . Use and handling of the cordless
electrical power tool
a) Charge a rechargeable battery unit using
only the charger recommended by the manu-
facturer. Chargers are often designed for a
particular type of rechargeable battery unit .
There is the danger of fire if other types of
rechargeable battery units are used .
b) Only the rechargeable battery units supplied
are to be used with an electrical power tool.
The use of other rechargeable batteries may
lead to a risk of injury or fire .
c) When they are not being used, store re-
chargeable battery units away from paper-
clips, coins, keys, nails, screws or other small
metal objects that could cause the contacts
to be bridged. Short-circuiting the contacts of
a rechargeable battery unit may result in heat
damage or fire .
d) Fluids may leak out of rechargeable battery
units if they are misused. If this happens,
avoid contact with the fluid. If contact occurs,
flush the affected area with water. Seek addi-
tional medical help if any of the fluid gets into
your eyes. Escaping battery fluid may cause
skin irritation or burns .
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries.
Protect the rechargeable battery
from heat, for example from continu-
ous exposure to sunlight, fire, water
and moisture. There is a risk of explo-
sion .
PAHS 12 B2

6 . Service

a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained .
Appliance-specific safety instructions
for manual sanders
■ Wear safety goggles and a protective dust
mask!
■ Secure the workpiece! A workpiece securely
held by a clamping device or vice is much safer
than one held in your hand .
■ Do not rest your hands next to or in front of the
appliance and the area being worked as there
is a risk of injury if you slip .
■ RISK OF FIRE DUE TO FLYING SPARKS! If
you sand metal, sparks will be produced .
Ensure that nobody can be put at risk and that
no combustible materials are located in the
immediate vicinity of where you are working .
WARNING! TOXIC VAPOURS!
► Working with the tool can produce harmful/
toxic dusts that represent a health hazard for
the person operating the appliance and for
any other people in the area .
WARNING!
► Sanding materials such as leaded paint,
some types of wood and metal can generate
dust that is toxic or otherwise harmful to your
health . Contact with or inhalation of these
dusts can represent a health hazard for the
person operating the appliance and other
people in the vicinity .
GB │ IE │ NI │ 5 ■