PeakTech 4980 Bedienungsanleitung Seite 26

3.1. Indicator
10
9
8
1. Data hold
2. Laser " on" symbols
3 Lock symbol
4. High alarm and low alarm symbol
5. ° C/° F symbol
6. Low power symbols
7. Emissivity symbol and value
8. Temperature values for the MAX
9. Symbols for MAX
10.Current temperature value
4. Measurement Considerations
Holding the meter by its handle, point the IR sensor toward the
object whose temperature is to be measured.
The meter automatically compensates for temperature deviations
from ambient temperature. Keep in mind that it will take up to 30
minutes to adjust to wide ambient temperature changes. When low
temperatures are to be measured followed by high temperature
measurements some time (several minutes) is required after the low
(and before the high) temperature measurements are made.
1 2 3 4
7
-25-
5
6