Safety Precautions - PeakTech 4980 Bedienungsanleitung

1. Safety precautions

This product complies with the requirements of the following
European Community. Directives: 2004/108/EC (Electromagnetic
Compatibility)
Damages resulting from failure to observe the following safety
precautions are exempt from any legal claims whatever.
* do not subject the equipment to direct sunlight, extreme
temperatures, extreme humidity or dampness
* use extreme caution when the laser beam is turned ON
* do not let the beam enter your eye, another person's eye or
the eye of an animal
* be careful not to let the beam on a reflective surface strike
your eye
* do not allow the laser light beam impinge on any gas which
can explode
* do not let the beam of any body
* do not operate the equipment near strong magnetic fields
(motors, transformers etc.)
* do not subject the equipment to shocks or strong vibrations
* keep hot soldering iron or guns away from the equipment
*
allow the equipment to stabilise at room temperature before
taking up measurement (important for exact measurement)
-21-