Operating Elements And Connections - EuroLite DMX OPERATOR 1610 Bedienungsanleitung

No. Element
1 Button group FIXTURE
2 Button group SCENE
3 Button group CHASE
4 Display
5 USB port
6 Sliding faders 1-10
7 Sliding fader WAIT TIME
8 Sliding fader FADE TIME
9 Sliding fader STROBE
SPEED
10 Button PAGE

OPERATING ELEMENTS AND CONNECTIONS

Function
Buttons 1-16 to select and deselect devices. The LEDs indicate which
devices are selected.
Buttons 1-8 to select and deselect scenes. The memory banks are split into
2 pages which can be selected with the corresponding PAGE button. The
control LEDs next to the button indicate which page is selected.
Buttons 1-8 to select and deselect chases. The memory banks are split into
2 pages which can be selected with the corresponding PAGE button. The
control LEDs next to the button indicate which page is selected.
Shows the current DMX value or activity.
To connect a USB drive for data backup, import of data and firmware
updates.
For adjusting the DMX values of the connected lighting effect units. The
current DMX value is indicated in the display. The controls are split into 2
pages so that 2 x 5 DMX channels can be controlled per fixture.
To adjust the running speed when a chase is running in time-controlled
mode (0.1s – 10 min).
To adjust the fading speed between two scenes when the illumination
scene in a memory bank or a chase is running in time-controlled mode or
sound control mode (0-30 s).
To adjust the flash rate of the strobe effect.
To switch the faders (6) between the two pages 1-5 and 6-10. The control
LEDs indicate which channel group is selected.
14 • EN