Operating Elements And Connections - EuroLite DMX Power Splitter 4x4 Bedienungsanleitung

1 2
IN
100-240V~
50-60Hz / 5W
POWER DMX DMX LINK
16A max.
No. Element
1 P-Con power input
2 DMX512 input
3 DMX512 feed-through
output
4 Signal indicator
5 Power indicator
6 Fuse holder
7 TERMINATE switch
8 RDM FILTER switch
9 DMX512 outputs 1-4
with signal indicators
10 P-Con power outputs
Note: This user manual describes the model with 3-pin XLR connectors as a reference. Illustrations of the other
model with 5-pin XLR connectors are comparable.

OPERATING ELEMENTS AND CONNECTIONS

3 4 7 8
OUT 1
TERMINATE RDM FILTER
SIGNAL
POWER ON OFF
POWER
5 6
Function
For connection to 100-240 volts via the mains cable provided.
3-/5-pin XLR plug to connect the DMX control signal.
Direct DMX output for connecting additional DMX devices or DMX splitters
within the same DMX chain as the DMX input.
Flashes when a signal is present at the DMX input.
Lights when the device is connected to the mains.
To protect the mains input.
In depressed position the DMX line of the DMX input is terminated by a
resistor. In released position the termination resistor is not active.
In depressed position RDM data is filtered out of the DMX line. In released
position RDM data is transmitted.
3-/5-pin XLR jacks to connect DMX chains. When a DMX signal is output,
the signal indicators light up.
For power supply (4 x 4 A) of the DMX devices.
OUT 2
DMX POWER DMX
10
13 • EN
9
OUT 3 OUT 4
POWER DMX POWER
DMX POWER
SPLITTER 4x4
DMX