4
CONNECTIONS AND OPERATION
1
First, connect the LEDs to the screw terminals V+ (positive pole) and
V- (negative pole). The total load by the LEDs must not exceed 8 A;
otherwise the control unit will be damaged.
2
For power supply, a matching power supply unit will be required (min.
12 V, max. 24 V). Connect the power supply unit to the screw
terminals V+ (positive pole) and V- (negative pole). The power supply
unit must provide the current required for operating the LEDs plus a
supply current of 100 mA for the control unit.
Button
www.eurolite.de
Function
LEDs on/off
Brightness up
Brightness down
13