Connecting The Refrigerator - Waeco CoolMatic CRD 50 Bedienungsanleitung

CD50, CRD50
7.2 Undo the lock
NOTICE!
A
Only adjust the locking mechanism when the drawer is open. The
unit will be damaged if this is adjusted when the drawer is closed.
The refrigerator has a locking mechanism (fig. 5 1, page 4) which is also
used to protect it during transport. The following settings are possible:
 Lock (turn wheel clockwise all the way): The drawer is locked and
secured.
To open the drawer, lift the handle up and lift the drawer out.
 Vent (turn wheel anti-clockwise all the way): The drawer is slightly open,
but fixed in position.
Use this position if you are not going to use the unit for a long time.
7.3

Connecting the refrigerator

Connect the refrigerator to DC power
The refrigerators can be operated with 12 Vg or with 24 Vg.
NOTICE!
A
To avoid voltage drops and loss of performance, keep the cable as
short as possible and avoid joins.
For this reason avoid additional switches, plugs or multi-way
adapters.
➤ Determine the required cross section of the cable in relation to the cable
length according to fig. 9, page 6.
Key for fig. 9, page 6
Co-ordinate axis
l
∅
NOTICE!
A
Make sure that the polarity is correct.
➤ Before starting up the appliance for the first time, check whether the
operating voltage and the battery voltage match (see type plate).
EN
Installing and connecting the refrigerator
Explanation
Cable length
Cable cross section
Unit
m
mm²
37