Control Elements; Installing And Connecting The Refrigerator - Waeco COOLMATIC CRD50 Montage- Und Bedienungsanleitung

CD50, CRD50
6.2

Control elements

No. in
fig. 2, page 3
1
2
3
4
7 Installing and connecting the
refrigerator
A
NOTICE! Safety instructions for installation on boats
Please note the following instructions for installation on boats:
 The device can be tilted sideways up to 30°. When setting up
the refrigerator, note that it must be fastened to take account
of this. If you have any questions regarding installation, consult
your specialist dealer.
 Install the refrigerator so that the warm air produced can easily
flow away (either upwards or to the sides, fig. 3, page 4).
 The appliance is designed for ambient temperatures between
+16 °C and +38 °C.
 If the appliance is powered by the mains, ensure that the
power supply has a residual current circuit breaker.
EN

Installing and connecting the refrigerator

Explanation
Temperature controller
Green LED: operation
Red LED: fault
Interior lighting
35