Control Elements; Installing And Connecting The Refrigerator - Waeco COOLMATIC CR-Serie Bedienungsanleitung

_cr-kuehlschraenke.book Seite 39 Montag, 6. April 2009 1:03 13
COOLMATIC CR Series
No. in illustration Explanation
6.2
fig. 6, page 5
7
a
Downloaded from www.Manualslib.com
1 Freezer compartment
2 Wire shelf (folding, so that bottles can be put in the fridge)
3 Fruit compartment
4 Shelf
5 Bottle restraint (to hold bottles in the door)
6 Compartment with lid (hinged)

Control elements

No. in
Explanation
1 Temperature controller
2 Green LED: operation
3 Red LED: fault
4 Interior lighting
Installing and connecting the
refrigerator
Safety instructions for installation on boats
Please note the following instructions for installation on boats:
– The device can be tilted sideways up to 30°. When setting up
the refrigerator, note that it must be fastened to take account of
this. If you have any questions regarding installation, consult
your specialist dealer.
– Install the refrigerator so that the warm air produced can easily
flow away (either upwards or to the sides, fig. 8, page 6).
– The appliance is designed for ambient temperatures between
+18 °C and +43 °C.
– If the appliance is powered by the mains, ensure that the power
supply has a residual current circuit breaker.
– Observe all the other installation instructions in this section.
manuals search engine

Installing and connecting the refrigerator

39