Installing And Connecting The Refrigerator - Waeco CoolMatic CRD 50 Bedienungsanleitung

CD50, CRD50
7 Installing and connecting the
refrigerator
NOTICE! Safety instructions for installation on boats
A
Please note the following instructions for installation on boats:
 The device can be tilted sideways up to 30°. When setting up
the refrigerator, note that it must be fastened to take account of
this. If you have any questions regarding installation, consult
your specialist dealer.
 Install the refrigerator so that the warm air produced can easily
flow away (either upwards or to the sides, fig. 4, page 4).
 The appliance is designed for ambient temperatures between
+18 °C and +43 °C.
 If the appliance is powered by the mains, ensure that the power
supply has a residual current circuit breaker.
 Observe all the other installation instructions in this section.
7.1 Installing the refrigerator
NOTICE!
A
 Fasten the device as described in the operating manual to
prevent hazards.
 Keep objects clear of openings in the housing or mounting
structure (such as ventilation slots).
 The refrigerator is only suitable for installation in a fitted niche.
Once it is installed, only the front of the appliance may be
accessible.
The appliance is designed for ambient temperatures between +18 °C and
+43 °C. In continuous operation, the air humidity may not exceed 90 %.
Set up the fridge in a dry, sheltered place. Avoid placing it near heat sources
such as radiators, gas ovens, hot water pipes etc. Do not let it stand in direct,
strong sunlight.
EN

Installing and connecting the refrigerator

35