Installing And Connecting The Refrigerator - Waeco CoolMatic CR-65 Bedienungsanleitung

_cr-kuehlschraenke.book Seite 41 Donnerstag, 5. Juni 2008 12:19 12
COOLMATIC CR Series
7 Installing and connecting the
refrigerator
Safety instructions for installation on boats
Please note the following instructions for installation on boats:
– The device can be tilted sideways up to 30°. When setting up
the refrigerator, note that it must be fastened to take account of
this. If you have any questions regarding installation, consult
your specialist dealer.
– Install the refrigerator so that the warm air produced can easily
flow away (either upwards or to the sides, fig. 8, page 6).
– The appliance is designed for ambient temperatures between
+18 °C and +43 °C.
– If the appliance is powered by the mains, ensure that the power
supply has a residual current circuit breaker.
– Observe all the other installation instructions in this section.
7.1 Installing the refrigerator
Warning!
Fasten the device as described in the operating manual to prevent
hazards.
Warning!
Keep objects clear of openings in the housing or mounting structure
(such as ventilation slots).
Warning!
The refrigerator is only suitable for installation in a fitted niche.
Once it is installed, only the front of the appliance may be
accessible.
Note:
In the case of integrated refrigerators, please remove the locking
mechanism at the top and bottom. You can contact the Dometic
WAECO branch in your country for more information (addresses on
the back of the operating manual).

Installing and connecting the refrigerator

41