Waeco CoolMatic CRD 50 Bedienungsanleitung Seite 42

Using the refrigerator
Defrosting the refrigerator
The appliance has two options to remove the condensation resulting from
operation:
 pass it directly outside:
Remove the drip-tray (fig. 6 1, page 5).
Connect a hose (fig. 7 2, page 5) to the outlet connections (fig. 7 1,
page 5).
 collect in the drip-tray:
Empty the drip-tray (fig. 6 1, page 5) as required.
Defrosting the freezer compartment
NOTICE!
A
Never use mechanical tools to remove ice or to loosen objects
stuck to the device.
To defrost the refrigerator, proceed as follows:
➤ Take the contents out.
➤ If necessary, place the contents in another cooling appliance, to keep
them cool.
➤ Set the temperature control knob to "0".
➤ Leave the door open.
Switching off and storing the refrigerator
If you do not intend to use the refrigerator for a long time, proceed as follows:
➤ Set the temperature control knob to level "0".
➤ Disconnect the power cable from the battery or pull the AC cable plug out
of the rectifier.
➤ Clean the refrigerator (see chapter "Cleaning and care" on page 43).
➤ Turn the locking wheel (fig. 5 1, page 4) anti-clockwise to the end stop
("Vent").
➤ Close the door until it latches in.
✓ The door stays open thus preventing smells from arising.
42
CD50, CRD50
EN