EDELRID EN 358 Gebrauchsanleitung Seite 21

Service (repairs) may only be carried out by the manufacturer
or a center authorized by the manufacturer.
Inspection
The product must be checked and, if necessary, maintained
whenever this is necessary but at least yearly by the manufac-
turer, an expert or an authorised testing centre.
In the process, it must be ensured among other things that the
product labelling is legible.
Once the above-mentioned 10 years period of use has been
exceeded, the personal protection equipment product must be
withdrawn from further use.
STORAGE, TRANSPORT AND CARE
Storage
Store in a cool, dry, dark place outside transport containers. Avoid
contact with chemicals (caution: battery acid!) Store without me-
chanical stress caused by jamming, pressure or tension.
Transport
The product must be kept away from direct sunlight, chemicals,
dirt and mechanical damage. For this purpose, a protective bag or
special storage and transport containers should be used.
Cleaning
Clean soiled products in luke-warm water (if necessary, use pH-
neutral soap). Rinse well. Dry at room temperature, never use a
tumble drier or dry close to radiators! If required, halogen-free
commercial disinfectants may be used.
With PPE products which are fi rmly integrated into clothing, the
corresponding included cleaning instructions are to be followed.
If required, hinges of metal parts may be oiled after cleaning.
WARNING! Failure to follow these instructions may endanger life!
INFORMATION ON THE PRODUCT:
Manufacturer: EDELRID
GAL_SAF_Harness ENERMONT 96 pages.indd 21 GAL_SAF_Harness ENERMONT 96 pages.indd 21
Model: Name of the product
Product description:
Fall arrest harness according to EN 361, work positioning harness
according to EN 358, sit harness according to EN 813, harness
according to EN 12277 type; rescue harness according to EN
1497, rescue loop according to EN 1498, type, rope park harness
according to EN 361 and/or EN 12277; - Standards indicated in
some cases with year of issue
Lot number: G xxx y
Identifi cation: (to be entered by the user him/herself if appropriate)
i-Symbol: Warning notices and instructions must be read and
observed
CE 0123: the authority supervising production of PPE
(TÜV SÜD Product Service GmbH, 80339 Munich, Germany)
Year of manufacturing: *
Fall arrest harness according to EN 361:
Marking A: fall arrest eyelet
Marking A/2: A/2 + A/2 = A
: Edge tested according to prEN 354:2008
Remarks: Instruction for use: CE XXXX: notified authority which
is responsible for controlling and issuing the EC-Type Approval
Certificate of the product.
Technical Datasheet: Lot number with year of construction.
Our products are manufactured with the utmost care. However,
should any of our products give cause for a justifi ed complaint,
please advise us of the lot number.
We reserve the right to make technical amendments.
02.04.2013 14:35:07 02.04.2013 14:35:07