Eliwell EWCFW-08 Bedienungsanleitung Seite 9

Parameter Function
Local/Remote Definition
(3)
P220 Local/Remote
Selection Source
(3)
P221 Frequency Local Reference
Selection
(3)
P222 Frequency Remote Reference 0 = Keypad
Selection
(3)
P229 Local Command Selection
(3)
P230 Remote Command Selection
(3)
P231 Forward/Reverse Selection
- Local and Remote
Analog Input (s)
P233 Analog Input Dead Zone
P234 Analog Input AI1 Gain
(3) (5)
P235 Analog Input AI1 Function
(**) Only available on the control board A2 (refer to item 2.4). For programming instructions, please, refer to the parameter P235 detailed
description.
CFW-08 - QUICK PARAMETER REFERENCE
Adjustable Range
0 = Always Local
1 = Always Remote
2 = HMI-CFW08-P or
HMI-CFW08-RP Keypad
(default: local)
3 = HMI-CFW08-P or
HMI-CFW08-RP Keypad
(default: remote)
4 = DI2 to DI4
5 = Serial or HMI-CFW08-RS
Keypad (default: local)
6 = Serial or HMI-CFW08-RS
Keypad (default: remote)
0 = Keypad and
1 = AI1
2, 3 = AI2
4 = E.P.
5 = Serial
6 = Multispeed
7 = Add AI0
8 = Add AI
and
1 = AI1
2, 3 = AI2
4 = E.P.
5 = Serial
6 = Multispeed
7 = Add AI0
8 = Add AI
0 = HMI-CFW08-P or
HMI-CFW08-RP Keypad
1 = Terminals
2 = Serial or
HMI-CFW08-RS Keypad
0 = HMI-CFW08-P or
HMI-CFW08-RP Keypad
1 = Terminals
2 = Serial or
HMI-CFW08-RS Keypad
0 = Forward
1 = Reverse
2 = Commands
3 = DIx
0 = Inactive
1 = Active
0.00 to 9.99
0 = (0 to 10) V/(0 to 20) mA /
(**)
(-10 to +10) V
1 = (4 to 20) mA
2 = DI5 PNP
3 = DI5 NPN
4 = DI5 TTL
5 = PTC
Factory
Unit
Setting Setting
2 -
0 -
1 -
0 -
1 -
2 -
1 -
1.00 -
0 -
User
Page
9