Eliwell EWCFW-08 Bedienungsanleitung Seite 14

CFW-08 - QUICK PARAMETER REFERENCE
Parameter Function
(3)
P407 Rated Motor Power
Factor
Measured Parameters
(1) (3)
P408 Run Self-Tuning
(3)
P409 Motor Stator Resistance
SPECIAL FUNCTION - P500 to P599
PID Regulator
P520 PID Proportional Gain
P521 PID Integral Gain
P522 PID Differential Gain
P525 Setpoint (Via Keypad) of the
PID Regulator
P526 Process Variable Filter
P527 PID Action
P528 Process Variable
Scale Factor
P535 Wake up Band
P536 Automatic Setting of P525
Notes found on the Quick Parameter Reference:
(1) This parameter is only displayed in vector mode (P202 = 2).
(2) This parameter is only displayed in scalar mode P202 = 0 or 1.
(3) This parameter can be changed only when the inverter is disabled (stopped motor).
(4) This parameter is only available with HMI-CFW08-RS.
(5) The analog input value is represented by zero when it is not connected to an external signal.
In order to use an analog input as a digital input with NPN logic (P235 or P239 = 3), it is
necessary to connect a 10 k resistor from terminal 7 to 6 (AI1) or 8 (AI2) of the control
terminal strip.
(6) This parameter is only available in the CFW-08 Plus version.
(7) The parameter value changes automatically when P203 = 1.
14
Adjustable Range
0.50 to 0.99
0 = No
1 = Yes
0.00 to 99.99
0.000 to 7.999
0.000 to 9.999
0.000 to 9.999
0.00 to 100.0
0.01 to 10.00
0 = Direct
1 = Reverse
0.00 to 99.9
0.00 to 100.00
0 = Active
1 = Inactive
Factory
Unit
Setting
According to -
the inverter
model
0 -

According to
the inverter
model
1.000 -
1.000 -
0.000 -
0.00 %
0.10 s
0 -
1.00 -
1.00 %
0 -
User
Page
Setting