Eliwell EWCFW-08 Bedienungsanleitung Seite 199

ACTION
Use the and
to select the control type
Press to save the selected
option and to start the tuning routine
after changing to Vector Control mode
Press the key and use the
keys and to set the
correct rated motor efficiency (in
this case 71 %)
Press the key to save the
selected option and to exit the
programming mode
Press the key to go to the
next parameter
Press the key and use the
keys and to set the
correct rated motor voltage
Press the key to save the
selected option and to exit the
programming mode
Press the key to go to the
next parameter
Press the key and use the
keys and to set the
correct rated motor current (in this
case 2.90 A)
Press key to save the
selected option and to exit the
programming mode
Press the to go to the next
parameter
Press the key and use the
keys and to set the
correct motor speed (in this case
1720 rpm)
Press the key to save the
selected option and exit the
programming mode
Press the key to go to the
next parameter
HMI DISPLAY
keys
CAPITOLO 4 - START
DESCRIPTION
P202 = 2: Vector
Motor efficiency:
50 to 99.9 %
Set motor efficiency:
71 %
Exit the programming mode
Rated motor voltage range:
0 to 600 V
Set rated motor voltage:
220 V (the default value is maintained)
Exit the programming mode
Rated motor current range:
0.3 x I to 1.3 x I
nom nom
Set rated motor current: 2.90 A
Exit the programming mode
Rated motor rpm range:
0 to 9999 rpm
Programmed rated motor rpm:
1720 rpm
Exit the programming mode
Rated motor frequency:
0 to F
max
(2)
199