Reely Titan Bedienungsanleitung Seite 58

The vehicle doesn't drive in a straight line correctly
• On the transmitter, set the directional stability using the appropriate trimmer for the steering.
• Check the steering rods or wheel alignment setting.
• Did your car have an accident? If so, check the vehicle for any defective or broken parts and replace them.
Steering or driving motions opposite to movement of steering wheel and transmitter throttle/brake lever
• Move the reverse switch for the steering and the drive into the correct position on the transmitter.
• If the brushless motor is disconnected from the speed controller and reconnected, the alignment of the three con-
nection cables is not correct (this may not be possible with this vehicle, because there is no plug connection between
the motor and the speed controller). Simply swap two of the three cables between motor and speed controller. This
will reverse the rotational direction of the brushless motor.
The steering is not functioning or is functioning incorrectly, steering lock too slight on the vehicle
• If the transmitter offers a dual rate setting, check it (see operating instructions for the transmitter). If the dual rate
setting is too low the steering servo will no longer react.
• Check the steering mechanism for loose parts, check e.g. whether the servo arm is correctly fastened to the servo.
58