Safety Notes; Functional Description; Intended Use; Product Features - CST/BERGER Theodolite DGT 2 Originalbetriebsanleitung

Safety Notes

Read and observe all instructions.
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of the
measuring tool is maintained.
Do not operate the measuring tool in explo-
sive environments, such as in the presence
of flammable liquids, gases or dusts. Sparks
can be created in the measuring tool which may
ignite the dust or fumes.

Functional Description

Intended Use

The measuring tool is intended for precise measuring
of horizontal and vertical angles and distances.
2 610 A15 111 • 23.6.09

Product Features

The numbering of the product features refers to the
illustrations on the graphics pages.
1 Levelling screw
2 Operating panel
3 Display
4 Adjustment screw for horizontal fine-adjustment
5 Set screw for horizontal coarse-adjustment
6 Objective lens
7 Optical peep sight
8 Tilt axis
9 Optical plummet
10 Base plate
11 Thumbscrew for tribrach adjustment
12 Plate level
13 Handle securing screw
14 Carrying handle
15 Battery compartment
16 Focussing ring for telescope
17 Eyepiece
18 Set screw for vertical coarse-adjustment
19 Adjustment screw for vertical fine-adjustment
20 On/Off button for display
21 Circular bubble vial
22 Latch of battery lid
23 Battery lid
24 Hook of battery compartment
25 Tribrach
26 Screw casing
27 Eyepiece for optical plummet
28 Focussing ring for optical plummet
29 Cover for adjusting screws
Accessories
Adjustment mandrel
Carrying case
Objective-lens cover
Tool kit
Rain cover
Plumb bob
Sun cover
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.

English | 19