Led On Charger; Storing; Storing The Charger; Cleaning - Stihl AL 500 Gebrauchsanleitung

English
The charging process starts automatically
when the plug is inserted in a wall outlet and
the battery is fitted in the charger. The
charger switches itself off automatically when
the battery is fully charged.
The battery and charger heat up during the charging
process.
The STIHL AL 300 and AL 500 chargers have a built-in fan
which may cut in and out during the charging process.
2
4
1
► Insert the plug (6) in a convenient wall outlet (7).
The charger (3) runs a self test. The LED (4) glows green
for about 1 second and then red for about 1 second.
► Lay the connecting cable (5).
► Insert the battery (2) in the guides in the charger (3) and
press it home as far as stop.
The LED (4) glows green. The LEDs (1) glow green and
the battery (2) is being charged.
► If the LED (4) and the LEDs (1) stop glowing: Disconnect
the plug (6) from the wall outlet (7).
Battery is fully charged.
► Remove the battery (2).
6.3

LED on Charger

The LED indicates the operating status of the charger.
If the LED glows green, the battery is being charged.
20
3
7
6
5
► If the LED flashes red: Rectify the malfunction.
Malfunction in charger.

7 Storing

7.1

Storing the Charger

► Unplug the mains plug from the socket.
► Remove the battery.
1
► Roll up the connecting cord and attach it to the charger.
► The charger should be stored in such a way that the
following conditions are met:
– The charger is out of the reach of children.
– The charger is clean and dry.
– The charger is in an enclosed room.
– The charger is separate from the battery.
– The charger is not hung up by the connecting cord.
– The charger is stored at temperatures between + 5 °C
and + 40 °C.

8 Cleaning

8.1

Cleaning the Charger

► Disconnect the plug from the wall outlet.
► Clean the charger with a damp cloth.
7 Storing
2
0458-511-9921-C