Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning, Maintenance And Repairs; Preparing Charger For Use; Charging The Battery, Leds; Mounting The Charger On A Wall - Stihl AL 500 Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für AL 500:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3

5 Preparing Charger for Use

► Store the charger in a confined space.
► Store the charger at a temperature between +5°C and
+40°C.
■ The connecting cable must not be used for carrying or
hanging up the charger. The connecting cable and the
charger may be damaged.
► Hold the charger by the housing. A recessed handle is
provided on the back of the charger.
► Hang the charger on the wall bracket.
4.9

Cleaning, Maintenance and Repairs

WARNING
■ Aggressive cleaning agents, cleaning with a jet of water or
pointed objects can damage the charger. If the charger is
not cleaned correctly, components may no longer function
properly or safety devices may be rendered inoperative.
This can result in serious injuries.
► Clean the charger as described in this instruction
manual.
■ If the charger is not serviced or repaired correctly,
components may no longer function properly or safety
devices may be rendered inoperative. This can result in
serious or fatal injuries.
► Do not attempt to service or repair the charger.
■ If the connecting cable has a malfunction or is damaged:
► Have connecting cable replaced by a STIHL servicing
dealer.
5 Preparing Charger for Use
5.1
Preparing Charger for Use
Perform the following steps before starting work:
► Make sure the charger is in a safe condition, @ 4.5.
► Clean the charger, @ 8.1.
0458-511-9921-C
► If you cannot carry out this work: Do not use the charger
and contact your STIHL servicing dealer.

6 Charging the Battery, LEDs

6.1

Mounting the Charger on a Wall

The charger can be mounted on a wall.
2
1
a
b
a
► Check the following points when mounting the charger on
a wall:
– Suitable fixing materials are used.
– The charger is level.
– The following dimensions are maintained:
– a = at least 100 mm
– b (for AL 101) = 75 mm
– b (for AL 300 and AL 500) = 120 mm
– c = 4.5 mm
– d = 9 mm
– e = 2.5 mm
6.2

Charging the Battery

The charging time depends on several factors, e.g.
temperature of the battery or the ambient temperature. The
actual charging time may differ from the specified charging
time. For specified charging times see www.stihl.com/
charging-times.
English
3
d
e
e
19

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Al 300Al 101

Inhaltsverzeichnis