Herunterladen Inhalt Inhalt Diese Seite drucken

Adding Distances Together; Measuring Areas - Powerfix KH 2927-1 Bedienungsanleitung

Ultrasonic distance meter
Vorschau ausblenden Andere Handbücher für KH 2927-1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Adding distances together

1. Measure an area as described in the chapter
"Measuring distances".
2. If necessary, press the MODE 9 button several times
until the indicator
appears in the display w.
3. Press the READ q button to carry out a distance
measurement.
4. Press the RECALL 5 button. A "+" appears in the display
and the measured distance is transferred to the lower line.
5. Measure the next distance. The newly measured
distance is indicated in the upper line, the sum of the di-
stances is indicated in the lower line.
6. Repeat steps 2. to 4. to add further measurement values.
7. If you want to exit the addition mode press the
MODE 9 button. All values will be deleted.

Measuring areas

1. Switch the device on by pressing the ON/OFF 0 button.
2. If necessary, press the MODE 9 button several times
until the indicator
in the display w. The bar for the first part of the
measurement blinks.
3. Press the READ q button to measure the length.
The bar for the second part of the measurement blinks.
4. Press the READ q button to measure the width.
The width is shown in the upper line, the area in square
2
meters (m
), as the sum of both measurements, is shown in
the lower line.
L
(distance measurement)
L
W
(area measurement) appears
- 7 -

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis