B) Connecting The Aerial; C) Connecting The Line Inputs/Outputs - Renkforce HEADUNIT CD-3994 Bedienungsanleitung

7. Electric Connection
B) Connecting the Antenna
• Connect the antenna plug of your vehicle with the antenna socket at the back of the radio (socket next
to the LINE terminals).
• If your vehicle has a different antenna plug, please use a suitable adapter, available in specialist shops.

C) Connecting the LINE Inputs/Outputs

The CD tuner has a LINE input for connecting external audio sources and a LINE output for connecting a
power amplifier.
For the connection of the cinch sockets only use the shielded cinch wires. The use of
other cables might cause interferences.
Keep the length of the cables as short as possible. Do not place the LINE cables near
other cables to avoid interferences.
To avoid distortions or mismatching that could damage the unit, the cinch connector
must only be connected to devices with the suitable cinch terminals. For this purpose,
also observe the connection values indicated under "Technical Data".
• Connect the socket LINE IN with the outputs of the external audio source.
• Connect the sockets LINE OUT with the inputs of a power amplifier.
The red socket is a terminal for the right channel
The white socket is a terminal for the left channel
ENGLISH
Version 0/07