Renkforce HEADUNIT CD-3994 Bedienungsanleitung Seite 51

. Operation
AF button (1)
•
The AF button (15) activates the automatic transmitter station tracking.
"AF" will be displayed. If the reception of an RDS transmitter station gets weaker or the radio does not
receive and RDS station at all, the display flashes. When a station can be received well, the symbol is
displayed continuously.
When an RDS station is being received, the name of the station is displayed.
When you leave a transmission area, the radio can only switch to a better sender when the AF function is
activated.
Regional identification
Press the AF button (15) for about 2 seconds until the display shows REG ON or REG OFF.
When you press the AF button once more, you switch between these two modes. The normal display
reappears automatically after a few seconds.
If REG ON is on and the reception gets weaker, the radio only switches to a different frequency with exactly
the same progamme.
When the regional identification is off (REG OFF), and the reception gets weaker, the radio switches to a
different transmitter station with the same regional identification.
• TA button (1)
Press the TA button (14) once shortly
Press the button again
When you receive a traffic programme station, the display shows "TP" (traffic programme).
When you keep the TA button pressed, "TA" is displayed. Now you can only receive stations with a traffic
programme.
If a different audio source is being played (a CD for instance), the programme is set to mute during the
traffic announcement.
When you listen to a radio programme at a very low volume, the volume is automatically increased to
an easily audible level. When the traffic announcement is over, the volume you were hearing before is
restored.
Depending on whether you have set TA SEEK or TA ALARM (see "Menu Settings") the radio automatically
seeks a new traffic programme station or gives an alarm signal.
PTY button (1)
•
This button activates the PTY function. You can recognize it by the PTY display.
When you have pressed the PTY button, the display shows the type of programme you have selected and
the auto-scan for a station with this kind of programme starts.
There are two different groups of PTY (MUSIC and LANGUAGE). Select them by pressing the PTY button
(13) once more:
PTY group MUSIC > PTY group LANGUAGE > PTY OFF
Version 0/07
> TA is activated
> TA is de-activated.
ENGLISH
Refer to page 
1