Aerial Connection; Line Output Connection; Aux In Connection; Hands-Free Microphone Connection - Renkforce BSD-3023 Bedienungsanleitung

Electrical Connection

Aerial Connection

• Connect your vehicle's aerial plug to the aerial socket at the rear of the device (socket next to the cinch
connections).
• If your vehicle is equipped with a different aerial plug, use a matching adapter as available in specialist trade.

LINE Output Connection

The SD tuner has LINE outputs for the connection of an output amplifier.
Only use suitably shielded cinch cables for connection to the cinch sockets. Interferences may
occur from using any other cables.
Keep the connection line length as short as possible.
Do not place the lines close to any other cables. This prevents any interfering effect on the lines.
To avoid distortions or mismatches that may damage the device, the cinch connections must
only be connected to devices with matching cinch connections.
• Connect the cinch sockets at the rear of the device to the output amplifier inputs.

The red socket is the connection for the right channel
The white socket is the connection for the left channel

AUX IN Connection

The connection AUX IN (24) can be used to connect an external audio device (e.g. portable MP3 player); its signal
will be played back via the vehicle speaker.
• Connect the AIX IN (24) connection to the external device's audio output.

Hands-Free Microphone Connection

• Connect the hands-free microphone to the coupling of the back connection lines at the rear of the device.
59