D) Removal - Renkforce HEADUNIT CD-3994 Bedienungsanleitung

2 ENGLISH
. Mechanical Installation
Protect your CD tuner against vibrations with the bolt at the back of the unit.
In most vehicles, such a safety fastening is provided for. If this is not the case in your car, fasten the CD
tuner with the enclosed punched metal strip.
For the fastening, proceed as follows.

D) Removal

• Remove the front control panel.
• Carefully remove the plastic frame in the front of the system, by bending it slightly to the outside and
pulling it off from the unit.
• Insert the two unlocking keys into the lateral slots between the CD tuner and the installation frame, until
the CD tuner unlocks.
• Remove the fastening screw at the back of the unit.
• Carefully pull out the radio with the unlocking keys from the installation frame.
• Disconnect the ISO plug, the aerial plug and the LINE connections.
Version 0/07