Operation; General Operation; Menu Settings - Renkforce HEADUNIT CD-3994 Bedienungsanleitung

 ENGLISH

. Operation

A) General Operation
• button (22)
This button switches the radio on and off.
• LC Display (1)
The display (19) shows all the information, depending on the audio source that is being played (radio,
CD-player etc.).
• RESET button (2)
This button resets all the settings to the original settings that were made in the factory.
Press this button in the following cases:
- when you have completed the installation and connection
- when the CD tuner does not react to the operation of buttons any more
- when the display shows undefined characters.
B) Menu Settings
SEL button (2) and VOLUME control ()
•
In standard operation, the VOLUME control (3) is for setting the volume. Press the SEL button (2) once or
several times, to change the parameters BAS (bass control), TRE (treble control), BAL (balance control)
and FAD (fader control) by turning the VOLUME control (3).
Version 0/07
Do not turn the CD tuner on before you have read and understood these operating
instructions.
Check all the connections again. When you have done so, reconnect the negative pole
of the car battery.
To switch the CD tuner on, you can also press any other button.
Refer to page