Proper Use - Parkside PLP 100 Bedienungs- Und Sicherheitshinweise

Do not eat!
Do not drink!
Dispose packaging and appliance in an
environmentally-friendly way!
Soldering gun PLP 100
©
Introduction
Please make sure you familiarise yourself fully with the way
the device works before you use it for the first time and that
you understand how to handle it correctly. Please read the
operating instructions below. Be careful to keep these advice notes
and if necessary pass them on to a third party.
©

Proper use

The device is intended for soldering tasks in a DIY environment. Soft
soldering takes place at temperatures below 450 C°. Suitable solders
have typical melting temperatures around 200 C°. Use the device only
as described and for the indicated purposes. The device is not intend-
ed for commercial use. Any other use or modification to the device shall
be considered as improper use and could give rise to considerable
dangers. The manufacturer will not accept liability for loss or damage
arising from improper use.
Introduction
GB 7