Intended Use; Scope Of Delivery - Renkforce 419700 Bedienungsanleitung

3. Intended Use

The monitor is used specifically for monitoring purposes, e.g. in connection with external cameras, digital
recorders (DVR) or other devices.
The monitor has several inputs for analogue video signals for this (2x BNC, 1x VGA) as well as a digital input
(1x HDMI). The monitor also has an audio input (3.5 mm jack socket).
The video signal at the BNC-video input and the audio signal are passed through and available, e.g. for
recording on an external recorder.
Operation is performed via buttons at the monitor or an included IR remote control. An external mains
adapter is used for power supply.
The monitor can be set up via a standing base. Alternatively, the monitor can be fastened via the assembly
holes at the back, e.g. to a wall holder (not enclosed).
Read these operating instructions completely and attentively; they contain a lot of important information on
setup, function and operation. Always observe the safety information!
Any use other than that described above can damage the product and may involve additional risks such as
short circuit, fire, electric shock, etc. No part of this product must be modified or converted!
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
HDMI is a registered brand of HDMI Licensing L.L.C.

4. Scope of Delivery

• Monitor
• Standing base
• Mains adapter
• Mains cable
• IR-remote control with battery CR2025
• Operating instructions
25