Konica Minolta Multi Gloss 268 Betriebsanleitung Seite 40

Difference measurement and Pass/Fail 13
Create reference
References can also be saved by
entering the limit and target value
with the scroll wheel. Move the
mark to "Create reference" and
activate the function.
A display appears in which you
must assign a name for the new
reference. If you inadvertently
select a name that has already
been used, a message will appear
to this effect and the marker arrow
will jump back to the first position of
the name. Confirm the name with
the operate button.
In the next step you can define the
target and limit values of your
reference.
Define reference
With the three angle device, a
menu first appears in which you
can select the geometry.
After that, the menu appears for
selecting the target value, minimum
and maximum.
Select the desired variable and
press on the scroll wheel.
39