Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6
Overview of main menu
Mode
Sample mode
Statistics
Continuous
Basic mode
Advanced mode
Geometry
Save
Save
Select memory
Create memory
Delete memory
Display memory
Difference
Difference
Measure reference
Select reference
Create reference
Delete reference
Change reference
Calibration
Setup
The following can be used together simultaneously:
• Save with:
• Difference with:
22
Measurement without statistical evaluation.
Multiple measurement with statistics.
Measurement repetition (measuring interval adjustable).
Simplest mode: without saving and difference
Opens the "Mode" menu again with the previous
setting.
Geometry selection (available only with three angle
device).
Save functions for samples:
Turn saving on/off.
Select memory area from list.
Up to 50 memory areas can be created.
Pre-set memory areas (M60°...) cannot be deleted.
Bring up contents of memory (use scroll wheel).
Settings for difference mode:
Turn difference measurement on/off.
Measure reference.
Select reference (if saved).
Save up to 50 references and enter limit values for Pass/
Fail.
Delete individual references.
Enter/change limit values for Pass/Fail.
Calibrate, change cal. values GU - % scale.
Language, Display time, Date/Time, Beeper.
Sample mode, Statistics, Continuous
Sample mode, Statistics
Werbung
Inhaltsverzeichnis
