Reely REX-Xtreme 32 Limited Bedienungsanleitung Seite 63

Setting rear axle alignment:
The alignment for the rear wheels is set by the so-
called toe-in-block.
This is a plastics part attached to the rear differential
(see circle (A) in figure on the right).
The two metal axles holding the lower transverse links
are attached to the outer holes of the toe-in block.
A toe-in block with a different distance between these
two holes can be used to adjust the toe-in.
The vehicle's delivery includes additional toe-in
blocks in other sizes, so that the track can be set as
desired.
The alignment of the rear axle of your model vehicle has little effect on driving behaviour. Replacement of
the toe-in block is therefore only relevant for professional drivers.
A
Figure 11
63