Safety Information - MC Crypt LumiPAR 39-1 Bedienungsanleitung

4. Safety Information

In case of damage caused by non-compliance with these operating instructions, the warranty/
guarantee will expire. We do not assume any liability for consequential damage!
Nor do we assume any liability for damage to property or personal injury caused by improper
use or failure to observe the safety information. In such cases the guarantee/warranty will
expire!
Dear Customer: The following safety information is intended not only for the protection of the device but also
for the protection of your health. Please read the following items carefully:
• Read these instructions entirely and attentively before operating the product.
• Keep these instructions for later reference and include them with the device if you pass on the device to any third
parties.
• For safety reasons, any unauthorized conversions and/or modifications to the product are not permitted.
• This device is a safety class 1 product. The only permissible voltage source is a proper grounded mains socket
(90 - 250V / 50/60 Hz) of the public mains. Never overload the socket, e.g. by connecting several devices that
exceed the total load capacity of the mains socket.
• Anyone operating, installing, setting up, commissioning or servicing this effect beamer must be trained and
qualified properly and observe these operating instructions.
• Never look straight into the light source during operation. Keep a safety distance of at least 8.5 m from the light
source when watching it. The bright light flashes may temporarily impair your eyesight. Apart from this, epileptic
fits may be triggered under certain circumstances in persons sensitive to such lights. This particularly applies to
epileptics.
• During commissioning and programming, no persons must be present within an area of less than 8.5 m of the
light exit for safety reasons.
• Never watch the light source with optical instruments like magnifying glasses, binoculars, etc.
• LED radiation may be dangerous if the LED beam or a reflection enters the unprotected eye. Therefore,
familiarise yourself with the statutory regulations and measures of precaution for the operation of this kind of LED
device before using the device.
• Never touch the mains plug with wet or damp hands. There is the risk of potentially fatal electric shock!
• Do not touch the mains cable if it is damaged. First, power down the respective mains socket (e.g. via the
respective circuit breaker) and then carefully pull the mains plug from the mains socket. Separate the mains cable
from the device and replace it. Never use the product if the mains cable is damaged.
• This product is not a toy and not suitable for children. Children cannot judge the dangers involved when handling
electrical devices.
21