Safety Information - MC Crypt DL-1006 Bedienungsanleitung

4. Safety Information

In case of damage caused by non-compliance with these operating instructions, the warranty/guarantee will
expire. We do not assume liability for any consequential damage.
Nor do we assume any liability for damage to property or personal injury caused by improper use or failure
to observe the safety instructions. In such cases the warranty/guarantee is voided.
Dear Customer: The following safety information is intended not only for the protection of the device but also for the
protection of your health. Please read the following items carefully:
• For safety reasons, any unauthorized conversions and/or modifications to the product are not permitted.
• This device is a safety class 1 product. The only permissible voltage source is a proper grounded mains socket
(100-240 V/50/60 Hz) of the public mains.
• Anyone operating, installing, setting up, commissioning or servicing this effect beamer must be trained and qualified
properly and observe these operating instructions.
• Never look straight into the light source during operation. The bright light flashes may temporarily impair your eyesight.
Apart from this, epileptic fits may be triggered under certain circumstances in persons sensitive to such lights. This
particularly applies to epileptics.
• Never touch the mains plug with wet or damp hands. There is the risk of potentially fatal electric shock!
• Do not touch the mains cable if it is damaged. First, power down the respective mains socket (e.g. via the respective
circuit breaker) and then carefully pull the mains plug from the mains socket. In this case, take the device to a specialist
workshop for repair. Never use the product if the mains cable is damaged.
• When installing the device, make sure that the mains cable is not squeezed or damaged by sharp edges.
• This product is not a toy and not suitable for children. Children cannot judge the dangers involved when handling
electrical devices.
• Never place containers containing liquids, e.g. glasses, buckets, vases or plants on the device or in its vicinity.
Liquids may get into the housing and impair electrical safety. This also poses great danger of fire or potentially fatal
electric shock! If this is the case, first power down the respective mains socket (e.g. switch off circuit breaker) and
then pull the mains cable from the socket. Do not operate the product anymore afterwards, but take it to a specialist
workshop.
• Do not expose the device to any high temperatures, dripping or splashing water, strong vibrations or heavy mechanical
stress.
• Do not place any open sources of fire, such as burning candles, on or directly next to the device.
21