MC Crypt LumiPAR 39-1 Bedienungsanleitung Seite 32

7. Commissioning
Functional overview:
Hard colour change effect
SL0 red, green
SL1 green, blue
SL2 red, blue
SL3 red, yellow
SL4 orange, frog-green
The functions SL0-SL9 are identical to the functions A20-A29 in automatic operation.
Operation with fixed colour settings
• Press the button MODE (1) until the display (4) shows "Cxx". "C" means that the device is in fixed colour setting,
"xx" shows the selected colour.
• Set the desired colour with the buttons UP (2) or DOWN (3). The different colours are included in the following
list.
• The change is immediate.
• The light intensity is always 100% (full brightness).
In this operating mode, the device does not react to signals pending at the DMX IN (5) connection but
generates the corresponding DMX signals depending on the colour selected (3-channel signals) at the
DMX OUT (6) connection. This makes it possible to control devices connected to DMX OUT (6) and
encoded as slave devices synchronously.
The last colour set is stored even if this operating mode is left in between or the effect light is switched
off.
Colour overview:
Colour
C00 white
C01 red
C02 green
C03 blue
C04 yellow
C05 pink
C06 turquoise
30
SL5 pink, blue
SL6 turquoise, pink
SL7 red, green, blue
SL8 yellow, turquoise, pink
SL9 red, orange, green, turquoise, blue, pink
C07 light green
C08 orange
C09 marine
C10 frog green
C11 lavender
C12 multicolour
C99 off