Dometic TEC29 Montageanleitung Seite 48

Connecting the electrical power to the generator
➤ Connect the black wire to terminal 6 of the 6-pin plug on the extension ca-
ble.
➤ Connect the black wire to a suitable switch and connect the switch to the
ignition.
➤ Connect the white wire to terminal 5 of the 6-pin plug on the extension ca-
ble.
➤ Connect the white wire to a suitable switch.
10.7 Setting the switch-on and switch-off voltage for
automatic mode
➤ Hold down the starter button and press the on and off switch once.
✓ The following message appears in the display:
230V 1.0KW 0H
14.7V GEN OFF
➤ Press the starter button three times in a row.
✓ The following message appears in the display:
14.0VH
12.2VL
➤ Press the starter button briefly to change the values for the V
voltage and the V
➤ Press and hold down the starter button to go from V
➤ Press the starter button again to finish setting the switch-on and switch-
off voltage.
10.8 Creating a priority circuit
You can create a priority circuit using the AG 102 changeover relay whereby
the external voltage supply has priority over the generator, see circuit dia-
gram (fig. i, page 11):
Item Description
1 230 V external voltage supply
2 Vehicle electrical distribution system
3 Connection box
➤ Mount the AG 102 changeover relay in a suitable position.
48
switch-off voltage.
H
TEC29, TEC29LPG
switch-on
L
to V .
H L
EN