Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Caution: Devices may cause severe injuries when crashing down! If you have doubts concerning the safety
of a possible installation, do NOT install the device!
Before rigging make sure that the installation area can hold a minimum point load of 5 times the device's
weight.
Do only use appropriate screws and make sure that the screws are properly connected with the ground.
Operation via power unit
Connect the connection cable of the power-unit (9 V DC, 300 mA) with the DC IN-socket. Plug the power unit
into your outlet.
OPERATION
With the POWER-switch, you can switch the device on and off.
In the AUTO-mode, the 16 patterns are run automatically. You can adjust the speed with the AUTO SPEED-
control.
In the MUSIC-mode, the laser runs sound-controlled.
In the MANUAL-mode, the direction of the rotation, the rotation speed and the distortion can be adjusted.
Overview over the projection patterns:
CLEANING AND MAINTENANCE
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
Clean the front glass frequently from dust and smoke fluid residues.
13
Werbung
Inhaltsverzeichnis
