Werbung
Verfügbare Sprachen
Verfügbare Sprachen
O P E R A T I N G I N S T R U C T I O N S
www.conrad.com
MP4-Video-Digital-Watch
Item-No. 67 16 59
Intended Use
The product is a portable player for multimedia files (e.g. formats like MP3, WMA). A coulour LC-Display
is integrated in the device; the audio playback is being put out via a 2.5mm stereo jack plug.
Via an integrated microphone voice recordings are possible.
Date can be saved to the integrated memory (1GByte) by connecting a PC via the USB2.0 connection.
The current supply is ensured by an integrated LiPo-accumulator recharged with an external power adaptor
(provided).
The product must not get damp or wet.
The product is not a toy and should be kept out of the reach of children. The product contains fragile or
swallowable glass parts, bits and pieces, and further an accumulator.
Any use other than the one described above may damage the product and there are also other possible
dangers.
This product complies with the applicable national and European specifications. All names of companies and
products are trademarks of the respective owner. All rights reserved.
Contents
• Watch
• AC adaptor
• USB cable
• Earplug
• CD with driver and software
• Operating instructions
Safety instructions
The warranty will be void for damages arising from non-compliance with these operating
instructions!
Liability for any and all consequential damage is excluded!
We do not assume any liability for material and personal damage caused by improper
use or non-compliance with the safety instructions! The warranty is voided in these cas-
es.
• Any unauthorized conversion and/or modification of the product is inadmissible for safety and
Q.C. reasons (CE). Never dismantle the product!
• The design of the AC adaptor complies with protection class II. As a voltage source only a
proper power socket (230V~, 50Hz) of the public power supply system may be used.
• This product is not a toy, and should be kept out of the reach of children. Children do not real-
ize the danger arising from incorrect use of electrical devices. Be especially careful if children
are around.
• The product must not get damp or wet.
• Never expose the product to extreme temperatures (<0°C or >+50°C), direct intense sunlight,
dust/dirt, strong vibrations or other mechanical stresses.
• If the power adaptor is being brought from a cold into a warm room, water condensation can
form inside. Let the power adaptor therefore acclimatise to the room temperature before using
it; otherwise there is the danger of a life-threatening electric shock!
• Do not leave packing materials unattended. It may become dangerous playing material for
children.
• Handle the product with care. It can be damaged through impact, blows, or accidental drops,
even from a low height.
Notes on the accumulator!
In the watch there is built-in a so-called „LiPo"-accumulator (Lithium-Polymer). This modern type of recharge-
able battery does not have the so-called "memory effect", i.e., the rechargeable battery can be charged when-
ever you want.
Furthermore, it presents a higher energy content than conventional NiCd and NiMH rechargeable batteries.
Please observe the following notes regarding the handling of the LiPo accumulator:
• Never damage the accumulator; never demount it. Damaging the wrapping of the accumulator might cause
an explosion or a fire! The wrapping of the LiPo rechargeable battery does not consist, like conventional bat-
teries/rechargeable batteries (e.g. AA or AAA type) of a thin sheet, but consists of a sensitive plastic film
only.
• Never short circuit the contacts/connections of the rechargeable battery. There is a danger of fire and
explosion!
• Recharge the accumulator on a regular basis, even if the product is not used. The watch always needs a
(although small) amount of „current".
No initial discharge is required due to the selected accumulator technology. Simply recharge the recharge-
able battery completely, approximately once a month. In this way the device is always ready for use.
Depending on the frequency of use of the product a daily charging process can probably be necessary.
• Never leave the recharging product unattended.
• Place the watch for recharging on a heat-resistant non-flammable surface. A slight warming during the
charging process is normal.
• Seperate the watch from the PC if it is not needed.
Charging
• At first recharge the watch. Use the provided power adaptor; the charging takes about 1 hour depending on
the state of the accumulator.
Connect the watch with the provided USB cable to the corresponding connector on the power adaptor; plug-
Version 05/08
in the power adaptor to a mains socket (230V~/50Hz).
°
Connecting Earplugs
• On the left side of the watch there is a 2.5mm jack plug connector suitable for the provided earplugs.
• Via an adaptor (not provided) conventional earphones with a 3.5mm jack plug can also be used.
Data transmission
• The memory of the watch is empty on delivery; You have to transfer respective data with your computer to
the watch.
For this, connect the watch with the USB cable to a free USB port of your computer. For Windows
ME/XP/Vista no drivers are required since they are integrated in the OS. The memory of the watch will be
indicated as new drive like conventional removable media (e.g. USB sticks). The data transmission is con-
ducted at USB1.1-speed.
For Windows 98/SE you will find the drivers on the provided CD.
• The folder structure within the watch memory helps to sort the individual multimedia files. Do not delete it;
otherwise the data will probably be not recognised correctly and might not being played (folder „music" =
MP3/WMA files; „voice" = recordings; „video" = video files; „photo" = JPG images; „text" = text files).
• No conventional video files can be played with the watch, since this would take too much computational
power. Therefore you will find respective software on the CD that able to convert many kinds of video files
into a space-saving format.
Since there are many different video formats it can unfortunately not be guranteed that the software can
recognise and convert every video format.
• There is an innumerable amount of programmes that can create MP3 or WMA files. Therefore it is prossi-
ble that some MP3/WMA files cannot be played with the watch. If you have created the MP3/WMA file by
yourself, please use other software for generating MP3/WMA filed for testing reasons.
Operation
The buttons on the watch have the following functions (acc. to menu)
„D "
ON/OFF, Play, Pause, Enter, Stop
„M"
Confirm or delete
„DD"
next function, next title, fast-forward
„GG"
previous function, previous title, rewind
„V+"
Increase the volume
„V-"
Decreasing the volume
„DD" + „GG" = Reset
• Switching ON/OFF
Press the button „D " (or „M") for turning on; a welcome message will appear. If no button is pressed then,
the watch will display the current time.
If the watch is to be turned off, stop a possible playback/recording and keep the button „D " pressed for
about 2 seconds.
• Volume control
During playback of a music title or a video you can increase or decrease the volume by pressing the buttons
„V+", resp. „V-".
• Select function
By briefly pressing the buttons „DD" or „GG" you can select the desired function. Confirm your selection by
briefly pressing the button „D ". You can always return by pressing the button „M".
Playback of music files (function „Mode")
By means of the integrated equalizer different presets can be used for the sound playback (e.g. Rock, Pop,
Jazz etc.).
With a kind of file manager you can search through the folder for files, e.g. if you have saved several albums
as a seperate folder to the memory.
If a music title is played back you can select the next title with the button „DD"; the previous title with the
button „GG".
If the buttons „DD" or „GG" are kept being pressed during playback fast-forwarding/rewinding is initiated.
The button „D " stops the music title (Pause) and continues its playback.
You can return to the previous menu by pressing button „M".
Playback of recordings (function „Sond")
Here the recordings you have made via the integrated microphone can be played back (buttons „DD" or
„GG", start/pause playback with the button „D ", return to the main menu with the button „M").
Playback of video files (function „Playmode")
Select the desired video with the buttons „DD" or „GG" and start its playback with the button „D ". Button
„M" stops the playback (the selection menu appears); by repressing the button „M" you reach the main
menu.
Watch pictures (function „Display")
With „Mini" 4 pictures can be displayed minimised; with „slide show" you start an automatic change of the
pictures. With „Manually" the available pictures can be selected with the buttons „DD" or „GG"; with the but-
tons „V+" and „V-" the pictures can be scaled up/down. Pressing the button „M" leads you to the main menu.
Reading texts (function „E-Book")
Select the desired text file with the buttons „DD" or „GG" and let it being displayed with the button „D ".
Now you can scroll up and down the text with the buttons „DD", resp. „GG". Button „M" returns you to the
selection menu of the text files; by repressing the button „M" you reach the main menu.
Only standard text files (TXT), but no files of textprocessing software (Word, OpenOffice or the
like) can be displayed.
Recording (function „Record")
With „Record Setting" you can set the bitrate, respectively the sample rate. After starting a record it can be
stopped by pressing the button „M". Pressing the button „M" again will lead you to the main menu.
Setting time (function „Time") and display format selection
With „Time Setting" the time of day and the date can be set.
Use the buttons „DD" or „GG" for selecting year, month, day, day of the week, hour and minutes and
change their settings with the buttons „V+" and „V-".
Confirm your setting by pressing the button „D ".
Via the menu „Date Format" the order of year/month/day can be changed; via „Time Format" you can choose
between a 12h or a 24h display.
Basic settings (function „Setting")
Here you can set the duration of the background light and the automatic switching to stand-by-mode (ener-
gy saving mode) as well as the language of the OSD.
Select, just like in the other menus, the desired function with the buttons „DD" or „GG" and confirm the set-
ting with „D ". You can return to the previous menu by pressing button „M".
Maintenance and Cleaning
Only a professional repair shop should attempt to maintain or repair the device. The product contains no parts
that require servicing. Therefore, do not open it.
To clean the outside of the product, a dry, soft and clean cloth is sufficient.
Do not apply too much pressure to the display, this can cause scratch marks or failures of the
display.
Dust can easily be removed with a soft, clean brush and a vacuum cleaner.
Handling
Please observe thoroughly the safety notes in this operating manual and all further information
regarding the handling of the product.
• The product is not a toy and should be kept out of the reach of children. The product contains small parts,
glass (display) and an accumulator.
• The product must not become damp or wet. The watch will be destroyed by intruding humidity. Remove it
for bathing, showering etc.
If the mains adaptor becomes damp or wet, touching could be perilous!
• The device must not be opened or disassembled.
There are no serviceable parts inside the housing. If you open/take apart the device, the license (CE) and
the guarantee/warrantee expires as well.
• Do not drop the product even from a low height as this might damage it.
• Avoid the following adverse environmental condition when operating the product:
- wetness or excessively high air humidity
- extreme cold or heat
- direct sunlight
- dust or flammable gases, fumes or solvents
- strong vibrations
- strong magnetic fields, e.g. close to machines or loudspeakers
• During operation make sure that no cables are pinched or caught.
• Ensure that the insulation of the entire product is neither damaged nor destroyed. Check the product for
damage before every use!
If you notice any damage, the product must NOT be used.
Damages of the watch can cause an explosion or a fire of the integrated LiPo accumulator. If this is the case,
bring the product to a specialised workshop and do not use it anymore.
• Protect the watch from scratches, dust and dirt.
Disposal
Electrical and electronic products do not belong to the household waste!
Please dispose of the device when it is no longer of use, according to the current statutory
requirements.
Technical data
Operating voltage mains adaptor: ........230V~/50Hz
Output mains adaptor: ..........................5V=, 400mA
Current supply of the watch: ................internal LiPo accumulator, 3.7V, approx. 245mAh
PC connection: ....................................USB1.1
Audio output: ........................................2.5mm stereo jack socket
Memory:................................................1GByte
Display: ................................................OLED, 1.5", 65k colours
Resolution:............................................128 x 128 pixels
These operating instructions are published by Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.
The operating instructions reflect the current technical specifications at time of
print. We reserve the right to change the technical or physical specifications.
© Copyright 2008 by Conrad Electronic SE. Printed in Germany.
Werbung
