Setting The Time Manually - Conrad Electronic CPA601 Bedienungsanleitung

c) Setting the time manually
You can set the time manually in case the projection clock does not detect a DCF time signal
(e.g. due to interference, installation site, etc.). Then the clock works like a normal quartz clock.
Proceed as follows:
• Press the button "CLOCK" button for about 2 seconds. Now "24" blinks on the top display
line for setting the 12/24 time format.
• With the button "" or "" you can select between 12 and 24 hour time format.
With 12-hour time format, "AM" is displayed in the first half of the day and "PM" during the
second.
• Briefly press the "CLOCK" button, the hours flash.
• Adjust the hours with the button "" or "".
• Briefly press the "CLOCK" button, the minutes flash.
• Adjust the minutes with the button "" or "".
• Briefly press the "CLOCK" button, the year flashes.
• Adjust the year with the button "" or "".
• Briefly press the button "CLOCK"; the date format blinks on the display (the sequence of day
("D") and month ("M") can be changed).
• Select the desired sequence with the button "" or "".
• Briefly press the "CLOCK" button, the month flashes.
• Adjust the month with the button "" or "".
• Briefly press the "CLOCK" button, the day flashes.
• Adjust the day with the button "" or "".
• Briefly press the button "CLOCK"; the language for the weekday display blinks ("E" =
English, "G" = German, "F" = French, "I" = Italian, "S" = Spanish).
• Adjust the language with the button "" or "".
• Briefly press the "CLOCK" button, the temperature unit (°C or °F) flashes.
• Select the temperature unit with the button "" or "".
• Briefly press the button "CLOCK"; the top display line blinks "ON" or "OFF". "ON" = DCF
reception is on, "OFF" = DCF reception is off.
49