Conrad Electronic CPA601 Bedienungsanleitung Seite 40

/
C Button "
• Press briefly for the display of the alarm time 1, alarm time 2 and the date
• If the alarm time 1 or 2 are displayed, press longer (approx. 2 seconds) to set alarm 1 or 2
afterwards.
D Button ""
• In normal operation, press longer (approx. 2 seconds) to perform a new DCF reception
attempt (if the DCF reception is activated)
• Increasing the value e.g. when setting the time etc. (press briefly for individual values, press
longer for fast setting)
E Button ""
• Reducing the value e.g. when setting the time etc. (press briefly for individual values, press
longer for fast setting)
• If the alarm time 1 or 2 is displayed, press briefly to turn the alarm function on or off.
F Button "CHANNEL"
• Press briefly to switch between indoor and outdoor temperature (up to 3 outdoor sensors are
possible if available)
• Press longer (ca. 2 seconds) to search for available outdoor sensors
G Button " "
• Press briefly to rotate the display of the time projection by 180°
H "RESET" button
• Press briefly to reset the radio projection clock to the factory settings (alternatively, remove
the batteries and disconnect the device from the power pack unit)
40
"