Maintenance And Cleaning; Disposal - Parkside PBSG 95 C3 Originalbetriebsanleitung

Unscrew the 4 screws
and remove the cover
2
Remove the brick
Loosen the screw connection
the brick in the brick holder
5
27 mm open-end spanner (not included) or
a nut driver (see Fig. B).
Note: Turn counter-clockwise to open!
Remove the metal ring
Secure the new brick in the brick holder
with the flattened edge down and reinstall
the metal ring
6
Tighten the screw connection with a 27 mm
open-end spanner.
Note: Turn clockwise to close!
Be sure the spring
product as shown in Fig. D and insert the
brick into the product. Turn the brick until it
is again precisely fitted as shown in Fig. A
or the brick cover
Reattach the brick cover
place with the 4 screws

Maintenance and Cleaning

This product is maintenance-free except for
replacing the bricks.
ELECTRIC SHOCK! Unplug the
mains plug from the socket prior
to performing maintenance or repairs.
Clean the product regularly, preferably
immediately after every use.
Use a dry cloth to clean the housing. Never
use petrol, solvents or cleaning agents that
attack plastic.
10 GB/IE/NI
on the brick cover
3
(see Fig. A).
2
.
5
keeping
7
with a
8
.
6
.
is installed in the
9
will not fit.
2
and fasten in
2
.
3
RISK OF
open the product except to replace the
brick. Always have repairs or parts replace-
ments performed at the service centre or by
an electrician. If the input lead on this prod-
uct is damaged, it must be replaced with a
specially prepared power cord at the
service centre.
8

Disposal

The packaging is made entirely of recyclable
materials, which you may dispose of at local re-
cycling facilities.
Observe the marking of the packag-
ing materials for waste separation,
b
a
which are marked with abbreviations
(a) and numbers (b) with following
meaning: 1–7: plastics / 20–22: pa-
per and fibreboard / 80–98: com-
posite materials.
The product and packaging materi-
als are recyclable, dispose of it sepa-
rately for better waste treatment. The
Triman logo is valid in France only.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
To help protect the environment,
please dispose of the product prop-
erly when it has reached the end of
its useful life and not in the house-
hold waste. Information on collection
points and their opening hours can
be obtained from your local authority.
RISK OF INJURY! Never